Hi, all,
Moving from a Mission pedal to an EV-2 to try to reduce my stage footprint and rig weight a bit. I can't seem to get this to calibrate properly. Where the Mission pedal has a smooth, seemingly linear taper (according to the "Calibrate" graphic on the GT16), the EV-2 fills virtually 75% of that same graphic after only about 10-20% of the travel.
This is whether or not I've adjusted the X and Y tapers or not. The EV-2 resistance, though, shows a 90k pot with a linear taper. The Mission is a 10k pot also with probably a linear taper.
Has anyone gotten an EV-2 to work properly? If so, any pointers?
Moving from a Mission pedal to an EV-2 to try to reduce my stage footprint and rig weight a bit. I can't seem to get this to calibrate properly. Where the Mission pedal has a smooth, seemingly linear taper (according to the "Calibrate" graphic on the GT16), the EV-2 fills virtually 75% of that same graphic after only about 10-20% of the travel.
This is whether or not I've adjusted the X and Y tapers or not. The EV-2 resistance, though, shows a 90k pot with a linear taper. The Mission is a 10k pot also with probably a linear taper.
Has anyone gotten an EV-2 to work properly? If so, any pointers?
Last edited: