At long last, here's the 4.6.0 release...
EDIT: Now updated to 4.6.1, details below.
FEATURES:
(...)
- Added CCs for remote bank up and bank down functions
Hi Ron,
Is there any chance that we can have the option to "Jump" to a specific bank?
I just tested the new "CC remote Bank Up and Bank Down" commands, but it just jumps to the very first preset in that selected bank, as opposed to the behavior of changing banks using the internal PBC Buttons, whereas the bank change is followed by a SCROLL proccess and the successive flashing of presets 1 to 5 before we even select one.
The new CC command doesn't start the scrolling (sequential flashing) of the presets in the new bank. And it is still limited to a number of presses for each bank until I reach the desired one.
My idea here is to have a page in my PBC called BANKS where each of the buttons is assigned do a specific bank (1-10). From there I could jump to a selected bank and then wait for the scrolling of buttons 1-5 so that I can have a previous visualization of the presets contained in that bank before choosing one specifically.
This way I can avoid so much tapdancing (jumping from BANK 1 to BANK 8 involves 7 presses in the "bank up" button).
So, my questions here are:
1) Woudn't it be nice to have a specific "Jump to BANK" behavior where the bank is changed just like having multiple presses in the BANK UP or BANK DOWN buttons? (ex. Jump from BANK 1 to BANK 8, or from BANK 10 to BANK 2).
2) Is there any way to start the bank scrolling so that we can visualize all the presets from that "Jumped Into" BANK before effectivelly loading any one of them? Maybe a separate CC or "System" command to start scrolling the presets in the new bank.
Thank you very much in advance.