Rack gizmo to Demeter TGA 3

[Meanoldfireman]

I need to control a TGA 3 with the rack gizmo. While I could do this with unused loops and the 1/4" jacks on the amp, I'd prefer to go from the 7 pin on the gizmo to the pin xlr on the amp. I have the pinout from James (1 - ground,2 - ch 1-2/3, 3 - channel 2-3). What's the pinout on the 7 pin? Thanks.

 

[rjmmusic]

It's actually an 8-pin on the Rack Gizmo, although you could use a 7-pin if you can't find an 8. The connector shield is the ground and pin 1 = switch 1, pin 2 = switch 2, etc.

 

[Meanoldfireman]

That was going to be my first guess, but I figured I'd ask. Thanks.