Budro Thedog
Well-Known Member
So, I had my whole setup working fine until I decided to re-build everything, and now I'm just missing a basic midi issue.
My setup is :
MMGT32>>Axe FX III Midi In>>Axe Midi Thru>>EG>>MEG1>>MEG2>>RG
Axe: Midi Chan 1
EG: Midi Chan 2
MEG1: Midi Chan 3
MEG2: Midi Chan 4
RG: Midi Chan 5
Everything works great with the above setup with the exception of bi-directional MIDI items, like "get preset names" or the tuner display on the MMGT from AXE.
If I shift the setup to the AXE Midi Out (instead of thru), Get Preset Names and the Tuner work great, but, now I can't control any of the effect gizmos or rack gizmo.
I know that messages received at the AXE MIDI IN port are passed automatically to the AXE MIDI THRU port.
But, is there a setting I need to configure on the AXE to pass midi messages thru the Midi OUT port?
My setup is :
MMGT32>>Axe FX III Midi In>>Axe Midi Thru>>EG>>MEG1>>MEG2>>RG
Axe: Midi Chan 1
EG: Midi Chan 2
MEG1: Midi Chan 3
MEG2: Midi Chan 4
RG: Midi Chan 5
Everything works great with the above setup with the exception of bi-directional MIDI items, like "get preset names" or the tuner display on the MMGT from AXE.
If I shift the setup to the AXE Midi Out (instead of thru), Get Preset Names and the Tuner work great, but, now I can't control any of the effect gizmos or rack gizmo.
I know that messages received at the AXE MIDI IN port are passed automatically to the AXE MIDI THRU port.
But, is there a setting I need to configure on the AXE to pass midi messages thru the Midi OUT port?