Came to my mind the problem maybe is connected to Midi Clock? - I have set this to "Master" in the Midi page.
Please send me your settings file and I will investigate. Thanks!
Came to my mind the problem maybe is connected to Midi Clock? - I have set this to "Master" in the Midi page.
Please send me your settings file and I will investigate. Thanks!
Mine too....I had to turn it off thru the settings menu on the PBC.Hello Ron,
since i upgrade the new firmware, i notice that the Dry Dignal IA doesn't work...
I agree.... needs a fix.Thanks for your help!
but it doesn't work anymore and the led doesn't light..
I just spent 20 min trying to get the "Dry Mix" (button 7) on the switches page to toggle the dry mix on and off on the PBC to no avail. I can set the Dry Mix to off from the settings on the PBC itself and the button has no affect. But can't use any button setting thru the Editor to allow the Dry Mix to be toggled.It might be that the button needs to be reassigned. In the editor, right click on the button and Assign CC > Internal > Dry Mix.
The dry signal action changed in 4.0 as part of creating the Input action. The settings conversion should have taken care of the 3.0 to 4.0 changes, but maybe it didn't. I'll investigate it.
let me send you my file.....easier than me trying to describe something I'm sort of unsure of....What do the button settings look like for the Dry Mix button, when viewed in the editor?
let me send you my file.....easier than me trying to describe something I'm sort of unsure of....
Still not able to connect strymon pedals to Nixie via pbc. Are others experiencing this? If you have succeeded are there certain midi settings I need to change on strymon pedals?
Just tried that....and I THOUGHT that is how I had it set (I must have sent you a file saved when I was experimenting)....but that still doesn't make it work. On the PBC the display shows Outputs A...B....and D (Dry) is on. The "Dry Mix" button on the Switches page has no effect.Yes, definitely a conversion issue. Edit the Dry Mix button, select the "Signal #3" action in the left and click Remove Action. Then click New Action, set Type to Audio, subtype to Signal, and the Number field should now read "1: Dry Mix"
Just tried that....and I THOUGHT that is how I had it set (I must have sent you a file saved when I was experimenting)....but that still doesn't make it work. On the PBC the display shows Outputs A...B....and D (Dry) is on. The "Dry Mix" button on the Switches page has no effect.
Could there be a setting on the PBC Settings control that over riding turning that "Dry Mix" off?
I found a solution for the missing "auto tap" and the function button. As I wrote earlier, I have tempo's entered in each song. - They didn't work because all my presets was set to tempo=off during conversion. - I changed this to tempo=song - and everything worked again.Please send me your settings file and I will investigate. Thanks!