Hi,
I noticed a small bug using the PBC with Hx stomp.
I set-up the HX stomp as a device and created a page where i can access the HX Fs 1 to Fs 5 with corresponding buttons on the PBC.
The problem lies in the fact that under the "access CC" in the PBC the FS buttons have the same cc numbers than the FS in the HX and that those numbers are reserved in the HX and not accessible.
So, if you try the Learn midi function in the HX "Fs bypass" and click the button in the PBC that you want to assign to the FS, you get the message "CC reserved" in the HX and the midi stays to off.
So you are able to access the FS in the HX but nothing will be saved if you change preset or load the same preset in the PBC.
So, the solution is to change the CC numbers in the Access CC for each buttons in the PBC to numbers that are not reserved in the HX and assign them to the FS Bypass and save the preset in the HX. Now the cc mdi info is saved in the HX.
Now the HX FS switches will respond to the status of the buttons in the Buttons when recalling a preset on the PBC.
Hope i make sense...
I noticed a small bug using the PBC with Hx stomp.
I set-up the HX stomp as a device and created a page where i can access the HX Fs 1 to Fs 5 with corresponding buttons on the PBC.
The problem lies in the fact that under the "access CC" in the PBC the FS buttons have the same cc numbers than the FS in the HX and that those numbers are reserved in the HX and not accessible.
So, if you try the Learn midi function in the HX "Fs bypass" and click the button in the PBC that you want to assign to the FS, you get the message "CC reserved" in the HX and the midi stays to off.
So you are able to access the FS in the HX but nothing will be saved if you change preset or load the same preset in the PBC.
So, the solution is to change the CC numbers in the Access CC for each buttons in the PBC to numbers that are not reserved in the HX and assign them to the FS Bypass and save the preset in the HX. Now the cc mdi info is saved in the HX.
Now the HX FS switches will respond to the status of the buttons in the Buttons when recalling a preset on the PBC.
Hope i make sense...