Recent content by biglidband

What's the difference in these commands? I was able to get PC commands to work correctly via the Preset page. However after I started a new layout from scratch w/in the editor, those PC commands don't work. I am able to get them to work via the IA Actions in the Button settings.

I don't have the bandwidth anymore to figure this stuff out on my own. I would like to hire someone remotely using FaceTime to help me get my set up going. It's not wildly complex in the grand scheme of things. It would likely take less than an hour. I've got everything communicating w/ one...

great thanks

I can't figure out how to get the MMGT to trigger various snapshots w/in a preset. I can get it to move between presets but not snapshots. I see the midi data for the preset on the front of the Helix but I don't really know what to do w/ that info. Goal Access the 8 snapshots per HELIX...

Not sure if this has been addressed yet.

I'm having a senior moment. The effects in my rack sound terrible when using my acoustic. Electric is fine for the most part, although the FUZZ doesn't sound great Acoustic GTR>Fishman DI (AMP out)>Gizmo input>loop 10 SEND into MIXER How would you put it into an FX loop on a Fishman...

That totally helped! thanks again

I don't have any iridium midi going to the presets that I'm using but I'm seeing 10 flash briefly on a couple presets which leads me to believe that I do have some midi commands somewhere that are effecting loop 10

I've noticed some significant latency when switching IA presets on the SEND 10 (DI) that I'm not experiencing on the OUT 10 (TRS Y cable into AMP1 & AMP2). I had a hold button but have since gotten rid of it (I don't think that would be this issue given that it's not happening on my OUT 10

This thing gets even better!! That's great to know! Does it override the loop assignment w/in the editor? I have a bunch of presets w/ those always on loops selected

BINGO! That was it! Thank you so much for taking the time to help me with this, I truly appreciate it. Love your gear!!

Same result, not getting any signal from the sends or the other outs. I'm only getting a signal from one out. I reset it to factory settings when I got it a couple days ago buy holding down loops 1 & 4 while powering it up. All the lights flashed blue once and then went out which leads me to...

Yes OUT 9 ->TRS-> IN 10 is stereo. When I plug the Iridium into OUT 10 via TRS I get signal. However no signal from SEND 10.

That helped get signal to both amps via TRS to dual TS splitter cable however I still don’t have a signal to Iridium via TRS to TRS FROM SEND 10. I have confirmed that the cable is good, I’ve also tried all of the jacks To the left but still no signal. Iridium works when connected directly into...

The iridium works fine when I plug directly into it. It’s not getting any signal from the gizmo. I’m also only getting one mono signal into the TRS Y cable coming out of 10 Out