Recent content by Chuk

I second your endorsement of Ron and his business. I had a major problem two years ago and Ron went above and beyond to help me out. I too live in Australia. He sent me replacement parts. Magnifico!

It was a 4th drive that the PC accepted from the GT format. (Very strange because the first drive is the one I've always used to update the GT. Go figure.) Anyhow....The firmware loaded as it normally would. I then successfully updated the GT with "Get Preset Names" and the Scene Names also...

I re-formatted the drive from within System Functions but I can't transfer firmware onto drive because Windows 10 wants re-format it again so it can be read by the PC.

Hi Ron. When I try and load the new 4.6.3 firmware I get "Unable to open directory". (There are no other files on the USB stick.)

I need some help with a problem with my MMGT22 (4.6.2). I'm trying to update the Preset/Scene names from my AxeFXIII (17.01) but when I select "Get Preset Names" and then "Get Scenes" ON, the MMGT just 'hangs' after I press START. If I change 'Get Scenes" to OFF then the MMGT will update but it...

I followed your link. When I enter 'Set default pedals' the GT responds "pedals assigned". I went to the AxeFXIII and noticed all the CC#s are set to NONE on both the Bypass page, Channels page and the External page. I assigned ExtCtrl 1-4 to the CC #11-14 as instructed but still no response...

SEND REALTIME SYSEX was indeed set to OFF so I've turned it ON. (I don't know how or why that happened as it was all working when stored away months ago and I never use the front panel of the AxeFX to make edits.) Happily, that has SOLVED my Tuner/Tap Tempo/Status issues. Thank you. Midi...

Yes Ron. Everything seems to be working as normal except for the Expression pedals and the data returning from the AxeFXIII (Tuner, Tap Tempo, Button status updates)

After a 10 month lay-off due to Covid 19, I have recently setup my stage gear to prepare for an NYE gig. I have been using the AxeFXIII throughout the lay-off in my studio without the GT/22. Upon reconnecting the GT/22 (which has been in storage since my last gig in February) I've noticed that...

Great question. Great solution. Thanks both of you.

Thanks Ron.

I was beating my head against a wall trying to get this function to work properly when I finally realised that it's a SCENE output function not an 'overall' (Preset) output function. I was watching my OUTPUT 1 Mixer page while I adjusted the settings and there was no response. When I finally...

Unfortunately checking the 'Update on Preset Change' does nothing to reload the Preset to its initial state on the Preset buttons. The Scene buttons always reload just fine. However it is with the 2nd press of a PRESET button that I wish the GT/22 to reload the preset to its initial state. This...

Hi Ron, I'm using AxeFxIII. I have attached a couple of screenshots of the Scene Button settings.

I'm a little confused about the 'Preset Button 2nd Press' function. I have it set to 'RELOAD' but it behaves unexpectedly. For instance; when I load a Preset then select any IA (Drive1 for example) but then re-select the Preset it does not revert to the saved state as I would expect ie it...