Recent content by Jon Stafford

That explains the behavior I am seeing. I must have missed that in the manual. Thanks!

Do the function LEDs come on when the tuner is engaged by design?

Here is the updated file with tuner working. Loop 3 is behaving as I described loop 4 above (intermittent flashing when toggling the tuner on) and both function switch LEDs illuminate while the tuner is engaged.

Thanks, Ron. I found where to do that and added the System/Tuner action, as well as the action for CC 119 Toggle for the tuner on/off commands. Now the tuner works, Eureka! However the function switches are still toggling and I can't find the connection. Also, now loop 3 is toggling back and...

I have been trying to get this working for a couple days. Bidirectional MIDI is on. MIDI channels are the same. 7-pin cable (checked for continuity on all 7 pins) from GT MIDI OUT to MEG-X MIDI IN. Only thing connected is the MMGT and the MEG-X, plus Mac for the GT editor via USB. Power supply...

What I noticed with my Mac, IIRC, was I had to update the firmware to 4.8 in order for the editor to read the settings from the hardware. Once I did that with a USB stick it was fine.

Editor crashes on my Mac when I assign the device to Synergy/Syn-2 and assign the buttons to the default of the Syn-2. As soon as I click "ok" on the pop-up confirmation window it crashes.

I think I’m good now. Another thing I realized, having the editor connected was causing some sync issues. When I got my layout set, I disconnected the editor and restarted the GT, everything works perfectly.

Oh, I think turning on Scene Revert in the Axe May have solved my problem. I’ll report back if not. Thank you for tying to help!

I just did a factory reset and checked those 2 settings. They are off by default. I’m still having sync issues. For example, my dirty and chunk patches have Delay 1 bypassed. If I go from dirty to chunk, turn on Delay 1, then go back to dirty, the delay remains on. It does not load the scene as...

Hmmm, we’ll I ended up trying song mode because my IA switches weren’t tracking changes in preset mode. Song mode fixed it. I’ll try going back to preset/scenes mode, but I may end up using the FC6 to get through the gig tonight and track down my gremlins when I have more time and don’t have to...

I have an FC6 and this behavior doesn't happen with that as the controller, so I am pretty confident I managed to create a situation where the MMGT is sending extraneous MIDI data which causes the behavior in question. Just switching scenes with the FC6 works as expected.

I can attach screen shots but my .rjs file is not recognized.

Yeah, I used the “attach files” button on the post and navigated to the file I mentioned, which is actually 1.8MB on my Mac. The screen shot was to show you (whoever reads this) that I cannot upload the file I saved from GT Editor, and I don’t know why. The forum software just tells me it is an...

The file I tried to upload is named Axe3-SYN-4CM.rjs but I get this message from the board software.