Recent content by Mike

Thanks for the reply and info. As I thought, Eventide big box gear can be challenging. I think Ill download the H9000 manual and see if I can get additional insight. Thanks again.

Wondering if anyone has setup their GT with the Eventide H9000? A buddy is getting ready to go out n the road again as soon as this crazy pandemic eases up and asked me to assist him in getting his rig configured. He purchased an H9000 and it's still in the box. Before we order a GT, we would...

I would be interested in trading. My GT-16 is also in mint condition.

Ron, So, for n ow I created a second Button page that to display Scenes 6-8. I also added Tap Tempo and Tuner button in the same space as they are on the first button page. I then added a "Preset Menu" button to the left of the "Bank Down". This now allows me to display the full AxeFx Preset...

Thank you Ron. I have finished installing and everything is working as per the setup you created. The Pg Up and Pg Dn buttons on the right do in fact page between the presets. I had to turn BiDirectional MIDI on as I am using the 7 pin cable and phantom power adapter box. What I still want to...

After setting up the GT16 and AxeFX, I don't see where the default setup included page up/dn ability to recall presets. I do see the Bank Up/Dn buttons. Is this something that was omitted intentionally? Obviously I can program two buttons to do this, but I was just wondering if there was a...

UPDATE: Ron, You're correct... :) I connected the Phantom Box to the AxeFX III with two One Control low profile 12" MIDI Cables I had from an old pedalboard. I removed the One Control MIDO cables and replaced them with two 18" BestTronics heavier/higher end cables that I also had. The tap...

I received the Mastermind GT22 today. When hooked up the the AxeFx III via the 7 pin Midi Cable, there is a noise being generated that pulses in time with the tap tempo. I thought this might me a ground loop issue so I installed a HumX in the AxeFX III power plug but it doesn't help. If the...

Ron, Thanks for the contrast fix. Just got back from my trip and will upload it this week. Happy Sunday. Mike

I have been using an SA-450 and PBC for quite a while without issue. I just received another PBC for my second Schmidt Array Board. Today, I hooked it up and also have no ground loop issues. Both boards have my midi time based pedals in loops 7-10 and analog pedals in loops 1-6. I can use the...

With the AxeFx III first units shipping tomorrow 3/7, any idea how long until the Mastermind GT will be functionally ready? Will this just be a firmware update?

Love your video and rig. It was a big help for programming. My rig is fairly simple these days. Three wet effects and 3 drive pedals. I tend to set up presets for a number of regularly used sounds. The number of these presets is somewhat manageable and I find it easier to page through them...

So helpful and so quick.....thank you. I will re-wire a cable tonight. This will preclude the need for a midi thru box as there is no room left on my board. Thanks

Is it possible to program the Midi In jack to be a second Midi Out? -Mike

Can an "Autoplay/Auto Collect" function be added? That way, I don't even need to show up at the gig. The PBC will automatically play my gig and collect payment. Mike