Caller9
Member
This started out as two pieces of plywood with a 42" long by 24" base and 10" top layer angled down from rear to front of base. After looking at many designs online, borrowing (quite heavily) from the Schmidt Array design, (I liked the way they handled the hinged top level with space underneath), and spending a week of nights with a CAD program measuring, trimming down, and planning for my proposed Mastermind PBC and new pedals, this is what developed. It's heavier than I hoped and turns out the Mastermind can (and will) take the place of my old Roland GP-16 controller so now it's a bit larger than it could have been. But, after all that's why we get into bands... to move heavy equipment. With the two flat rubber and spring steel handles on the front (not yet installed in pictures) it's manageable to my new foldup cart 
. The top is also 3/4" plywood and next build (if any) will probably have the top and bottom 1/2" with the sides remaining 3/4" . Finished size is now 36" x 24"
. The top is also 3/4" plywood and next build (if any) will probably have the top and bottom 1/2" with the sides remaining 3/4" . Finished size is now 36" x 24"
Last edited:
