Here's a new firmware release for you to try. The headline feature is for the Mastermind PBC/6X, but there are some things for all models.
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.1 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/PBC/MM432.zip
Mac Editor: http://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.3.0.dmg
PC Editor: http://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.3.0.zip
PBC/6X Manual: http://www.rjmmusic.com/downloads/PBC6X/PBC6X Manual-4.3.pdf
PBC/10 Manual: http://www.rjmmusic.com/downloads/PBC/PBC Manual-4.2.pdf (same as 4.2 manual)
Editor Manual: http://www.rjmmusic.com/wiki (not yet updated for 4.3)
- Split Mono loops - this allows you to take any of the stereo loops (including the insert loop) on the PBC/6X and split them into two separately controllable mono loops. You need to use insert cables to split the TRS jacks, but instead of left and right, you'll use them for primary and secondary loop. More details on this in a separate post.
- Added the ability to simple button page editing using the PBC/6X setup menu
- Added (untested) support for GFI Specular Tempus and Cabzeus
- Implemented the Get Preset Names button type (for use with Axe-Fx/Kemper)
- Fixed a bug that prevented editing of scene numbers on the PBC/LT
- Fixed a bug that caused weird behavior after changing a button to or from the Preset type
- Fixed Tuner Out bug on PBC/6X
- Fixed preset name editing on PBC
- Fixed Assign CC > Internal editor menu for all models
- Added CC control of insert points and tuner out on PBC/6X
- Fixed insert loop split
- Enabled missing GFI System pedal support
- Fixed preset name editing on the PBC
- MIDI Clock Auto setting now works on the PBC/6X
- Fixed handling of Axe-Fx III tuner, which was always off by 1 cent
- Fixed expression pedal position switch handling when using ExpPedal actions
- Turning on "Send Clock to MIDI In" setting no longer crashes the PBC/6X. This setting shouldn't even be available on an 6X, and will be removed from the next editor build.
- Fixed an issue that prevented connections to the editor software
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.1 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/PBC/MM432.zip
Mac Editor: http://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.3.0.dmg
PC Editor: http://www.rjmmusic.com/downloads/PBC/MastermindEditor-4.3.0.zip
PBC/6X Manual: http://www.rjmmusic.com/downloads/PBC6X/PBC6X Manual-4.3.pdf
PBC/10 Manual: http://www.rjmmusic.com/downloads/PBC/PBC Manual-4.2.pdf (same as 4.2 manual)
Editor Manual: http://www.rjmmusic.com/wiki (not yet updated for 4.3)
Last edited: