PBC 6x Crashing....

V

vincentvarvel

New Member
Hey---so I'm finally getting the hang of setting things up on the PBC 6x, but now that I've done some editing on it, it occasionally crashes. This happens when I scroll through the 4 Pages I have set up(The Presets and Loops page are untouched. I've changed the Switches page and added a 4th page for program changes to the Strymons). After I cycle back to the Presets Page, all the buttons go black and stop working. I can get out of this by holding 1 and 3 to get the Setup Menu and then it works ok for a bit. I also updated the firmware. Does this have anything to do with going back and forth between the Editor, sending changes and then using the PBC? I've had the same thing happen with the USB cable plugged in from my computer, or unplugged.
 
Almost every time someone reports this, this is due to having Local Page turned on for a preset, but no buttons defined in the local page. Check all of your presets and turn off Local Page if it's on.
 
You must log in or register to reply here.
Back
Top