I’m using a PBC10 with 2 voodoo labs control switchers, each with a custom cable from bestronics to the footswitch jack of 2 EVH 5150 100 watt amps (a stealth & an el34) I can change channels on each amp directly from the buttons in the voodoo labs units (except the green channel in the stealth doesn’t light up for some reason.) but I cannot get it to save any of these.
The manual says to hold down buttons 1&4 to save & they will blink but it doesn’t work. I am trying to set up presets in the pbc10 to change the channels
The manual says to hold down buttons 1&4 to save & they will blink but it doesn’t work. I am trying to set up presets in the pbc10 to change the channels