Search results

It has been a while since I needed to reprogram my board, I forget some settings :-( I currently have the Axe III into GT22. Everything works but I can not get the button lights to light up for on status. They work if I press like a stomp box but between scenes on stored settings they do not...

im using GT16 with amp gizmo to change channels on 5150 head. it works fine in momentary except i need it to toggle to control gate assigned to ia. basically I press channel 1 then hit channel 2 channel 1 light shuts off. with button set to toggle I have to hit the channel button again to shut...

Trying to control the Headrush pedal board with the mastermind .. have it all set up headrush docs say pedal # 3 is cc52 .. i set #52 in IA settings off 0 on 127 . nothing ?? Help lol

hi.. so a few months ago i posted i was having problems with my tuner appearing on the board. no signal. as u instructed 2 problems the 5 pin cable was not correct and i turned on the bidirectional switch in global. i put this down for a while and just picked it up. so everything works correctly...

I have a GT22 and trying to set up with Axe FX .. I trying to use axe presets as IAs (stomp box) Is there any way to make the pc change on IA settings higher than 127? or do I have to move all my user presets down on the axe to under 127? realizing 1-300 is factory presets. wut u think ? TIA

i go to get preset names..it scrolls thru the axe (preset #s are scrolling} when finished all presets are empty on gt16. up to the # i chose to get. ex. 1-450 on get presets. 451 on gt is still there 1-450 empty

Is there a way to get my tuner on the GT16 to connect with my Fratual Audio Axe FX ll ?

Can i control changes in Korg Triton with the Mastermind?

I use an expression pedal ( mission ) to control my gain on all heads. Modulation set to control input. Always worked fine, I would us 50% to have an input of 5, 30% for 3 ect.. and always the knob would be in the appropriate position. After last update i have value set to 50% but know points to...