When you set as a global you can have before the chain or after the chain
I use it after the chain
Ill get back to you with settings
Global Settings in axe and global pedal in MM
Sorry i assumed you were plugging into the expression pedal jacks on the mastermind
You have to use a TRS Cable ( not a standard cable ) so your pedal may not be compatible to plug in this way
Your Fractal Pedal could plug into the mastermind - your dunlop may have to go thru the fx loop
how do...
I am using it as a volume pedal also
I have 2 x Mission RJM Pedals
My Wah or Expression is in Pedal 1 input
My Volume ( set as Global Volume) is in Pedal 2 input - ( working Perfectly now on any preset )
All Pedals need to be calibrated before use no matter their function - quite easily using...
Using as Global means - It is set to a volume pedal irrespective of the localised block signal chains that make up each sound
In other words i dont have to put the volume pedal in the signal chain for it to work as a volume pedal - Something i like for more control over my sound dynamics
Make...
I had a the same issue
I use my volume pedal as a global but should still be the same
if you go to RJM edit software and select your expression pedal you will see 2 commands on the continous controllers
Turn one off and writ changes to device ( if that dosent work try the other one and turn the...
Ok - I’m well on my way now
I bought some presets from Austin Buddy to help the learning process and get more tones
i understand the loop block or any block for that matter must be in the Chain for it to work unless it’s global like my volume pedal
i can now assign any function to a button in...
Success
however I hooked it up to pedal 2 - I adjusted the ( was It taper values back to zero ) and works well enough - probably not as well as my volume pedal into an fx loop in my amp because it is processed but well enough for what I want it for
I’m sure I can fine tune later
i wanted to...
That’s Awsome
Your Settings have brought the axe fx alive
my Favourite preset is the Friedman and with your presets I can now switch on and off reverb flanger phaser
and multi delay on the second page in addition to the chorus delay and drive that was accessible before
This for me was a great...
Thanks iaresee
i have managed to upload your settings to my Mastermind GT22 - via drop box and GT Edit
The axe FX unit is still in factory preset mode apart from basic set up - midi channel 1 etc freq .... - is there another upload for the axefx 3 to marry in your layout options or do you...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.