Andy Timmons comp
- Thread starter REFAGAEM
- Start date
sread
Active Member
Mono cable will do the job. On the PBC the remote switches are TRS 1-2 (Tip, Ring) and 3-4 (Tip, Ring) with a common ground. You can use a mono cable and use switch 1, just keep in mind that you won’t be able to use switch 2 since they are shared on the same TRS connection on the PBC. You could use a Y cable to break out switch 1 and 2 for separate pedals to avoid this.
rmackmusic
Active Member
Not sure if you resolved this, but I use the AT comp with my PBC.
You would want a cable like this:
http://hosatech.com/product/stp-201rr/
The TRS jack would plugin to your PBC FN 1/2 (or FN 3/4) output
The Tip (black) jack would go into your AT pedal and be controlled by FN 1 (or FN 3).
Or if you se the Ring (red) jack, that would be controlled by FN 2 (or FN 4).
You would want a cable like this:
http://hosatech.com/product/stp-201rr/
The TRS jack would plugin to your PBC FN 1/2 (or FN 3/4) output
The Tip (black) jack would go into your AT pedal and be controlled by FN 1 (or FN 3).
Or if you se the Ring (red) jack, that would be controlled by FN 2 (or FN 4).
