Roadrunner
Well-Known Member
I'm building an external 4 x switch pedal to be connected to the 1/2, 3/4 inputs on the RJM22, these will be used for important but not frequently used IA's such as volume +/- and I will use the 2 others for song / bank up and down.
I would like to install LEDs as well so each click will power it on, does the 1/2, 3/4 inputs has any phantom voltage on it? As far as I tried to measure, I've seen a little less than 1vDC so I guess this is a total dry circuit but just in case…
Anyhow, if it is total dry, I will use the 9vDC output to power on the pedal.
Thanks.
I would like to install LEDs as well so each click will power it on, does the 1/2, 3/4 inputs has any phantom voltage on it? As far as I tried to measure, I've seen a little less than 1vDC so I guess this is a total dry circuit but just in case…
Anyhow, if it is total dry, I will use the 9vDC output to power on the pedal.
Thanks.