Function Switch not changing pages correctly

[Curtis Cook]

I have my function switch set up to change, on a tap, to page 4 (Timeline), and hold to page 5 (Big sky). I need to either tap or hold the button twice to go to the proper page. when Im on the proper page I need to tap it twice to return to presets (only on page 5, Big Sky).

So many questions, so little time!

 

[rjmmusic]

I assume you mean external switch? (External switches are inputs to the PBC, function switch is an output from the PBC)

It sounds like you're using a latching switch instead of momentary. Lots of information on external switches here:
http://www.rjmmusic.com/wiki/index.php?title=External_Switch_Compatibility

 

[Curtis Cook]

The on board function switch (lower right corner, usually set up as global pre set).

 

[shoelesscraig]

I'm guessing that you do NOT have the "momentary" box checked for these buttons (and the hold function)....try checking that.

 

[Curtis Cook]

That was it! Sorry for the continued stupid questions, but this forum was one of the handful of reasons that I bought the Mastermind over other products.

Thank you shoeless, you have chimed in on several of my "basic" questions.

Ron, you always chime in. I couldn't be happier with my purchase!

 

[shoelesscraig]

Thank you shoeless, you have chimed in on several of my "basic" questions.

Ron, you always chime in. I couldn't be happier with my purchase!

Bro I can only help with BASIC!! Lol! I'm not smart enough to answer most of the Advanced questions! I wait on Ron for that!!

I will say, the longer you mess with this thing, the better you get...you'll be surprised what you can make happen after a few months of tinkering.