FX Gizmo/mini mixer

[Les Paul Gibson]

Hey everyone,
I am trying to run my SDX-330 chorus unit, in loop 9, I have a delay in loop 10 and both outputs are going into the mini mixer and the Loop is going into the dry section(4) on the mini mixer. When both loops are combined it, gets a volume/tone boost. The mini mix goes back to the loop ob the Egnater Mod 100. Am I doing this right? the SDX is rackmount gear and my delay is an El capistan pedal. any suggestions?

thanks
Les Paul

 

[rjmmusic]

You should have things connected like this:

- Amp's fx send to In 9
- Send 9 to first effect processor input
- First effect processor output to line mixer input
- Out 9 to In 10
- Send 10 to second effect processor input
- Second effect processor output to line mixer input
- Out 10 to line mixer input
- Line mixer output to amp's fx return

Once you have that all hooked up, if you still have volume issues, check your output levels on the effects processors and the line mixer.

Give it a try, and let us know how it goes!