Globally switch phase output B from the PBC

Jef

Jef

Active Member
Hi,

Is there a quick way to globally switch the B output phase from the PBC?

This would be super useful during soundcheck, especially when playing on local backline.

Couldn 't find it in the manual.
 
You can assign a button to switch the B output phase, although the setting will still change from preset to preset. Probably the best thing for you to do with the existing firmware is to use a button to decide which phase is correct, then go into the menu and lock the phase to the correct setting.
 
You must log in or register to reply here.
Back
Top