MEG X Loops

J

Jasonzebra3

New Member
Hi Ron,

In the MEG X manual you have a diagram with 3 pedals in front of an amp and 2 pedals in the amps effects loop. Loop 4 is configured as always on. Can I utilise loop 4 as per diagram by putting my Strymon Timeline and Big Sky in the amp loop send and turn them on or off via midi?

thanks
Jason
 
Will there be any other effects in the amp's loop? If not, then you can use all 6 loops in front of the amp and put the Timeline and Big Sky in the amp's loop, outside of the MEGX, and control them with MIDI.
 
Jasonzebra3 said:
Yes. I wanted to put an Ep booster in loop 6.
Click to expand...
If you're saying that that's going to be in the amp's loop, then the connections would be like this:

"Front" effects in loops 1-4
Loop 5 send to amp input
Amp send to loop 5 return
EP Booster in loop 6
MEGX out to Timeline
Timeline to Big Sky
Big Sky to amp loop return

Loop 5 needs to be locked to stay on all the time
 
You must log in or register to reply here.
Back
Top