4.1 beta 2 is now available for testing. This one includes a ton of fixes and requests, more than the original 4.1 beta had.
FEATURES
TO UPDATE FIRMWARE:
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
THIS IS BETA FIRMWARE AND WILL LIKELY HAVE BUGS!
- First, back up your settings to a flash drive or computer! If you go back to 4.1b1 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGT41B2.zip
Mac Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b2.dmg
PC Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b2.zip
Manual: http://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.0.pdf
Editor Manual: http://www.rjmmusic.com/wiki
A video overview is available as well:
FEATURES
- Scene names are now stored as part of GT presets
- Axe-Fx III scene numbers can be specified in each GT preset, in addition to the usual preset number
- Scene buttons are automatically update to display scene names
- Created a new Get Preset Names option: Create Songs. When selected, will create songs and presets like the previous beta did. When Get Scenes is on and Create Songs is off, the GT will read preset and scene names and store them to presets without creating songs.
- Get Preset Names remembers its parameters from the last time you used it.
- Added Display Scene Name option - displays the scene name in the bottom of the main screen
- Added Scene Menu button type
- Added Get Preset Names button type - sends you directly to the Get Preset Names setup menu for a particular device
- Added support for Axe-Fx Controller block
- 6 channels now allowed on multiplexer, accessible through CCs
- Added support for Axe-Fx firmware 1.15 beta - looper changes and IR Player blocks
- Added Strymon Riverside and Sunset support
- Added Ramble FX Kismet support
- Fixed handling of Looper Once status
- Fixed Copy Button and Swap Buttons in GT setup menu, they now correctly copy hold functions
- Fixed bad interaction between Reverse Menus and IA Cycle Menu
- Fixed occasional loss of channel label on effect buttons
- Fixed Save Settings and some other menu items
- Fixed editing of Hold mSec on GT
- Added missing IA Cycle Menu option in GT menu
- Brought back missing Sysex action type in editor
- Added missing Multiplexer 2 block
- Fixed "fake" CC numbers over 127
- Fixed tempo button support
- Allow scenes/song to be set to as many as 8 scenes
- Fixed issue that caused tuner button to be disabled sometimes
- Fixed progress bar in Get Preset Names
TO UPDATE FIRMWARE:
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
THIS IS BETA FIRMWARE AND WILL LIKELY HAVE BUGS!
- First, back up your settings to a flash drive or computer! If you go back to 4.1b1 or earlier, your GT will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind GT while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind GT Bootloader" appear on the screen.
- Now plug the flash drive into your GT. The update should begin and will take a few minutes to complete.
Firmware: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGT41B2.zip
Mac Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b2.dmg
PC Editor: http://www.rjmmusic.com/downloads/MMGT/Beta/MMGTEditor-4.1b2.zip
Manual: http://www.rjmmusic.com/downloads/MMGT/Mastermind GT Manual-4.0.pdf
Editor Manual: http://www.rjmmusic.com/wiki
A video overview is available as well:
Last edited: