idkwhatimdoing05
Member
Here's my effect chain for reference. 7-10 is Synesthesia - Microcosm - Timeline - Bigsky - OUT
So if my Mono->Stereo button is in the out position, my delay is nice and stereo, bouncing from left to right.
This works fine, until the Synesthesia is added into the loop. Then the signal disappears.
The only way I can get this to work is to press the Mono->Stereo button in and then press the Mono Output button in. Then I have a signal that exists and is not heavily sided one way or the other.
My suspicion is that because Synesthesia has a mono input that this is creating the issue. I figured that because Synesthesia has a mono input that it would be safe in Loop 7, because every subsequent effect from there is mono. However, I wanted to post this here and see if anyone had any takes before I disassemble my board and have to replace it so I can have Stereo.
So if my Mono->Stereo button is in the out position, my delay is nice and stereo, bouncing from left to right.
This works fine, until the Synesthesia is added into the loop. Then the signal disappears.
The only way I can get this to work is to press the Mono->Stereo button in and then press the Mono Output button in. Then I have a signal that exists and is not heavily sided one way or the other.
My suspicion is that because Synesthesia has a mono input that this is creating the issue. I figured that because Synesthesia has a mono input that it would be safe in Loop 7, because every subsequent effect from there is mono. However, I wanted to post this here and see if anyone had any takes before I disassemble my board and have to replace it so I can have Stereo.
