I have created a button page for my Volante.
I have buttons 1 to 5 assigned to presets on the Volante (first action Volante/PC off: NONE on 1 trough 5
i have also added a Bypass CC action so that when i press a button it load the preset but also opens the ON button on the Volante. (Volante: Bypass / CC toggle #102 Off:0 on : 127)
All 5 switches on the PBC are grouped in group 2 on the Global to allow scrolling.
So if i press button 1 of the PBC to On, the Volante switches to preset 1 and the On switch lights up on the Volante. If i press button 2 the Volante switches to preset 2 etc. and if i press the button on the PBC to off the Volante ON switch lights off, putting the Volante on Bypass.
Each of the 5 buttons on the PBC has the "Send on preset change" and "Update state on preset change" clicked.
The problem i have is that the status of the Bypass mode is not stored on the PBC presets.
For ex: If i open Button 1on the PBC's Volante page The Volante moves to preset one and the ON switch of the Volante lights up and i can hear delay. I store to preset 1 of the PBC but when i go to preset 1 on the PBC the Volante moves to the right preset but the on switch does not light up.
What am i doing wrong?
I have buttons 1 to 5 assigned to presets on the Volante (first action Volante/PC off: NONE on 1 trough 5
i have also added a Bypass CC action so that when i press a button it load the preset but also opens the ON button on the Volante. (Volante: Bypass / CC toggle #102 Off:0 on : 127)
All 5 switches on the PBC are grouped in group 2 on the Global to allow scrolling.
So if i press button 1 of the PBC to On, the Volante switches to preset 1 and the On switch lights up on the Volante. If i press button 2 the Volante switches to preset 2 etc. and if i press the button on the PBC to off the Volante ON switch lights off, putting the Volante on Bypass.
Each of the 5 buttons on the PBC has the "Send on preset change" and "Update state on preset change" clicked.
The problem i have is that the status of the Bypass mode is not stored on the PBC presets.
For ex: If i open Button 1on the PBC's Volante page The Volante moves to preset one and the ON switch of the Volante lights up and i can hear delay. I store to preset 1 of the PBC but when i go to preset 1 on the PBC the Volante moves to the right preset but the on switch does not light up.
What am i doing wrong?