Hi, I’ve got an empress zoia wired in stereo in loop 4 of my 6x. In loop 5 I have a Strymon timeline in stereo going stereo out into a meris mercury 7 stereo out back to loop 5 return. I have a Strymon iridium wired in stereo in loop six. For some reason there are two patches in my zoia that somehow are routing to the wet signal of my mercury 7. If the zoia is on with that patch I MUST have the mercury 7 on. I tried to plug the outs of the mercury 7 into the timeline outs so that loop 5 was only the timeline and I had no signal. However, when I unplugged my timeline ins and outs and put them into the zoia instead and turned loop 4 off, everything was fine. I have no idea what’s going on. I didn’t unplug power from my mercury 7 when I had it out of the loop, is it possible that the signal from that patch is somehow going through my power supply and only into the wet signal of the mercury 7? I only have midi going to the timeline right now, I unplugged it from the zoia and never had it to the meris. Everything is powered with Strymon power supplies