Jon Stafford
Active Member
I have been trying to get this working for a couple days. Bidirectional MIDI is on. MIDI channels are the same. 7-pin cable (checked for continuity on all 7 pins) from GT MIDI OUT to MEG-X MIDI IN. Only thing connected is the MMGT and the MEG-X, plus Mac for the GT editor via USB. Power supply is the factory MMGT adaptor powering both units. MMGT v 4.9.1. I factory restored both devices multiple times. Only device enabled in the GT is the MEG-X. I reset the default button Loop 7 to be the internal tuner button: CC Toggle, CC# 119, Off=0, On=127. When I press the button, both function switches on the MEG-X light up. No tuner data is displayed on the GT. It just toggles the function with LEDs on and off. Of note, the LED for loop 4 will flash for a split second when I press the button intermittently (not on every press).
I then changed the CC# for the internal tuner in the MEG-X editor to be CC# 120. When I tested the tuner button, nothing happened (as expected since CC119 was now unrecognized). When I changed the tuner button to match CC# 120, again both function switch LEDs lit up.
File attached for anyone interested.
I then changed the CC# for the internal tuner in the MEG-X editor to be CC# 120. When I tested the tuner button, nothing happened (as expected since CC119 was now unrecognized). When I changed the tuner button to match CC# 120, again both function switch LEDs lit up.
File attached for anyone interested.