Firmware & editor version 5.1.0 are now available!
FEATURES:
TO UPDATE FIRMWARE:
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind. The update should begin and will take a few minutes to complete.
-OR-
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Use the editor's Transfer / Update Firmware menu option to update the Mastermind. This works with the PBC/6X and PBC/10s made after March 2019.
Firmware: https://www.rjmmusic.com/downloads/PBC/MM510.zip
Mac Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-5.1.0.dmg
PC Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-5.1.0.zip
Manual: https://www.rjmmusic.com/downloads/MMLT/Mastermind LT Manual-4.2.pdf
FEATURES:
- New device support:
- Amplitube Tonex
- Chase Bliss Mood 2 & Gen Loss 2
- Flower Sunflower
- Strymon Brig, Cloudburst and Ultraviolet
- Added new Bank Size parameter, which allows you to set a fixed bank size. This is the amount of presets the Bank Up and Bank Down advance through the preset list. (This has no effect in Song & Setlist mode.) The default value "Auto" is the old behavior, where bank size is determined by the number of preset buttons on the current page.
- Corrected the default settings for the Axe-Fx III looper button
- Improved the way log taper compensation works in expression pedals, expression pedal bar graph also works better when using log compensation
- Fixed issues in the setup menus relating to the "clear" button
TO UPDATE FIRMWARE:
PLEASE DON'T DO A MAJOR FIRMWARE UPDATE RIGHT BEFORE YOUR BIG GIG!
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Copy the file to a USB flash drive, and remove any other .rjf files from the flash drive.
- Eject the drive from your computer.
- Power on the Mastermind while holding the 1 and 3 buttons.
- Keep holding until you see "Mastermind Bootloader" appear on the screen.
- Now plug the flash drive into your Mastermind. The update should begin and will take a few minutes to complete.
-OR-
- First, back up your settings to a flash drive or computer! If you go back to 4.7 or earlier, your Mastermind will factory reset.
- Download and unzip the firmware file.
- Use the editor's Transfer / Update Firmware menu option to update the Mastermind. This works with the PBC/6X and PBC/10s made after March 2019.
Firmware: https://www.rjmmusic.com/downloads/PBC/MM510.zip
Mac Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-5.1.0.dmg
PC Editor: https://www.rjmmusic.com/downloads/PBC/MastermindEditor-5.1.0.zip
Manual: https://www.rjmmusic.com/downloads/MMLT/Mastermind LT Manual-4.2.pdf
Last edited: