tobyarmstrong
New Member
One quick question- Is it possible for me to insert my volume pedal using the Out 5-6, and the In 7-10 jacks?
Help me out, please! I’m doing the exact same thing, but I lose all audio. It’s almost operating like a kill switch. No audio comes out of the “out 5-6.”That's where I put mine!
I want to use my VP in the insert point between 4 and 5. Is there a difference in sound quality between using an inter point or a loop? I have an ErnieBall Jr. VP, which doest have a buffer from what I understand.You can put it in a loop like any other pedal, or connect it to the insert points (between loops 4 and 5 or between loops 6 and 7).
I want to use my VP in the insert point between 4 and 5. Is there a difference in sound quality between using an inter point or a loop? I have an ErnieBall Jr. VP, which doest have a buffer from what I understand.
Chris,Yes, it's easy enough to wire in. I use loops 7-10 in my amp's FX loop. Loops 9 and10 are in Parallel mode too. In order to maintain trails if you volume down you want to come directly out of your "Send" feed from your amp into your VP. Then out of your VP to the PBC (Input 7 Burffered or perhaps In 9 if you are only using 2 loops for the FX chain). Come out of "Output A" (or both if that's how you use it). See my attached scheme.
Ron,Yes, you could definitely put it there.