Recent content by Budro Thedog

That fixed it, thanks Ron

thank you so much as usual. As soon as I read it, it makes perfect sense. I was worried about a loop with that, but I guess, as long as the effects gizmos get information from the axe they dont need to have a connection back to the mmgt.

Well, maybe I'm not such an idiot (at least for this issue). It seems like the AXE FX III doenst do a soft merge of MIDI OUT to MIDI Thru. https://forum.fractalaudio.com/threads/midi-merge-soft-thru-for-out-midi-scene-block-send-to-thru-or-out-option.194085/ Does anyone have a workaround they...

So, I had my whole setup working fine until I decided to re-build everything, and now I'm just missing a basic midi issue. My setup is : MMGT32>>Axe FX III Midi In>>Axe Midi Thru>>EG>>MEG1>>MEG2>>RG Axe: Midi Chan 1 EG: Midi Chan 2 MEG1: Midi Chan 3 MEG2: Midi Chan 4 RG: Midi Chan 5...

Well, this one is solved, but, presents another problem with my setup (I will open a new thread). I had the midi cable in axe midi thru, not midi out. Moving the cable to midi out allows get preset names to work and also tuner to work. But, now the cc's are not getting to my RG, EG, and MEG...

To troubleshoot, I just factory reset my MMGT 22, re-added the axe fx iii, and added a tuner to an IA switch. Added Assign CC > Axe-Fx III > Tuner and added a System / Tuner action on the button. Bi-directional Midi is On. When I press the tuner IA, the AXE tuner appears, and the MMGT display...

Update: I bypassed all other devices, and used 2 brand new 5 pin midi cables to connect the MMGT to the AXE. The issue is still occurring. (note: I confirmed via multimeter Continuity Test that all 5 pins are connected in my midi cable)

config attached My midi chain is MMGT>AXE>EG>RG>MEG1>MEG2>MMGT

Howdy! Somehow, the 'get preset names' function stopped working on my MMGT for my axe fx iii. When I start the process to get preset names, I can see the axe going thru all of the presets (i.e., midi is working), but, the preset names show up as strange ascii (see pictures). Thoughts? FYI...

Very cool!

I set up a workaround, I just created another IEA switch that controls just the amp and cab blocks on the axe.

Didnt work... I found the first command has to be for the EG, then AXE.

fantastic thanks!! will try asap

Thanks, I thought I tried that. However the state of the IA then changed when I changed presets. Is there a way to have the IA state remain ON when I switch presets and have the CCs sent to the axe?

I have an IA switch that I use to engage a loop on my effect gizmo to send my signal to an amp. I also have the IA setup to turn off the AXE AMP and CAB blocks when I turn on my real amp so it doesnt mess up the sound. AXE-FXIII: Amp 1/ CC Toggle #58 off:127 on:0 AXE-FXIII: Cab 1/ CC Toggle...