Recent content by ralphonz

Hi guys, I'm getting this issue...but it only happens if my AXE FX II is also connected via USB. If I turn off the Axe FX then I'm able to read settings from my GT16 fine - not ideal but it works at least.

Hi Ron, this is happening to me as well. Running the latest editor, firmware and OS X 10.15.3. If I try to read settings from the device the editor causes the computer to freeze. Well, to be precise all input ceases to function but the computer seems to carry on running (i.e. programs still...

Hi all/Ron, It's been a long time since I used the editor to change my GT/16. I updated to the latest firmware and editor 4.4.0 and when I try to read the settings from device I get a time-out then my macs trackpad and keyboard freeze and I have to do a hard reset. It happens almost every...

Anyone got any advice here? I still can't get the BCR to work when going through the Mastermind. Only when I go into the axe directly...

Never mind I needed to turn Update on preset change on! Everything is grooving now with the GT as the master clock :)

Cool ok. But how can I set up a button to tap the tempo in to the GT? In the Manual it says: Each button has a Tempo parameter. If this setting is turned on, tapping the button repeatedly will make it flash at the same rate it was tapped. However this is not working for me. Tapping the...

It doesn't really matter which device is the source of the tempo at the moment, as long as they are locked in and I have my flashing light and BPM readout on the floor in front of me (I only need the BPM readout for some presets I have for a particular band). The calculate from flashes isn't...

Hi Ron, do you have any further info on this? Update on preset change is off and I'm running the latest firmware but I'm still getting the double flashes - only when the tempo is entered for the preset on the GT (which is necessary if I want to see the BPM on the button for that preset?).

Thanks for the suggestion and info. I've tried that but unfortunately "the closest I can get to 'locking' tempo" isn't actually locking tempo so it's not much use. The ideal solution would be to slave everything to the RJM clock, and be able to tap in the tempo to the RJM itself with a button...

I have BCR2000 midi controller. I've assigned a rotary to transmit CC19 on channel 1 (which controls external parameter 4 on my axe fx). When i plug the BCR straight into the MIDI in on the axe it is working fine and controlling the parameter. However, when I plug it into the remote in on the...

Ok, so I really can't figure this out, any help would be much appreciated. Basically, what I want to achieve is a flashing tap-tempo button that will display the current BPM of the preset on the Axe FX. I would like the tempo to change on the Axe FX if I tap it in with the button, and the...

But then I don't get a read out of the BPM on the LCD.

Wow! How do you afford all this stuff! SSL, avalon, API, not to mention all the amps, rjm and fractal stuff! Looks amazing, good stuff :)

Updated to 3.4.6 but still seeing the same behaviour. It drifts in and out of bing in sync with the Axe FX. Just to be clear I've got update on preset change and Send on preset change off for my tempo button.

Firmware 3.4.4. I'll update to 3.4.6 and report back :)