Recent content by Pedalboard Builder

  1. P

    Do Units in Bypassed Loops Affect the Pedalboard's Sound?

    I'm really curious — how can a bypassed loop that isn't part of the signal path still affect the signal due to impedance?
  2. P

    Do Units in Bypassed Loops Affect the Pedalboard's Sound?

    Hi Ron and everyone One of my customers asked me this question, but I didn’t quite understand it — so I’m sharing it here. Has anyone experienced something like this? One of my customers set up a REVV Drive in loop 7 of their PBC6X. According to them, when the board was initially delivered...
  3. P

    pbc10 7-10 loop question

    Hello, Happy New Year to all of you and stay healthy. In the situation where I use mono and stereo effects together in loops 7-10 on pbc10, should I use a ring disconnect cable? For example, Loop 7 Drive (mono) Loop 8 Drive (mono) Loop 9 Strymon Timeline (stereo) Loop 10 Strymon Big Sky...
  4. P

    H90 midi problem

    Hello, I am planning to use the GFI Synesthesia and the H90 together in a single stereo loop. I want the H90 to always remain in a default bypass state and primarily use the Synesthesia, activating the H90 only in specific situations. So far, I can say that the CC bypass button I set up for the...
  5. P

    pbc6x malfunctions in 5.3 firmware.

    Yes, I Uploaded the file here
  6. P

    pbc6x malfunctions in 5.3 firmware.

    Hello Ron, I updated my 6x from 5.1 to 5.3. I had no problems using it before. I updated to 5.3 today and this is what I am having. If I downgrade the firmware back to 5.1 or 5.2 it works fine.
  7. P

    BIGSKY is fixed on PC 1 and does not change

    Hello Ron and everyone, I recently completed a 6x board build. Here is the list of MIDI pedals on my board:H90, Strymon Mobius, Timeline, BigSky, SmartClock, Bloom I have completed all the PC settings and CC settings, and everything works fine except for one issue. The BigSky responds well to...
  8. P

    Global preset button that does not turn off

    Dear Ron, I have been using pbc for over 5 years, but today I learned something else. thank you
  9. P

    Global preset button that does not turn off

    Ron, hello. Suddenly something strange happened to me. Please look at my screenshot. When using a global preset, the LED light on the GainStage5 / h90 reverb hold button lights up. Even if I assign my global preset button to number 1, that button lights up. What's the problem?
  10. P

    multibox question

    Thanks Devan! I'll try it! your video was very helpful
  11. P

    multibox question

    Thank you. So what about this scenario? pbc6x > multibox > 5pin out 1 > smart clock > strymon > multibox in Will nixie work if I do this?
  12. P

    multibox question

    Hello, I use 6x and Strymon Trinity. I heard that if use a multibox can connect the 6x to your MacBook and use Nixie. Here's something I'm curious about. In this case, do I need a special midi cable for 6x? And I also use a smart clock. Can I use Nixie by connecting 6x -> smartclock -> multibox...
  13. P

    6x Hold Button Questions

    Thanks Ron, I really appreciate you taking your time to respond. I changed the settings as you said and it works normally as I want. But when I do this, why doesn't the light activate when the global preset is activated? update: As Ron told me, I set the global button the same as preset 1 and...
  14. P

    6x Hold Button Questions

    I uploaded my editor file here
  15. P

    6x Hold Button Questions

    Ron, and I have one more question. If you look at my screenshot, you will see a hold button on the right that goes to the global preset. activate the global button, Timeline and Big Sky will change to PC, but h90 will not change. The h90 hold button in preset 1.2 works well. In preset 1.2, the...
Back
Top