Search results

I have a rack mounted MAG connected to the power supply and is in a midi chain before an eventide timefactor. The interconnecting cable between the TF and MAG are secured inside the rack enclosure. When I open up the back of the rack, an input midi cable to the MAG and the MKV cable are easily...

My new mini amp gizmo, along with the Mark V cable, controled my amp well for the first practice. The next time I used it I noticed that the reverb on the amp would be on when LED/switch number eight would be off. If I turned on LED/switch number eight then the reverb on the amp would be off...

My current rig includes two pedals that use 9v DC @ 100mA or less with a 2.1mm center negative power connector, and the TimeFactor which uses 9v to 12v DC @ 400 mA with a 2.5 center positive power connector. I would like to add a midi foot controller system (liquid foot 12+ & Mini Amp Gizmo)...

Thx to martincliffe I found the list of interface cables at http://rjmmusic.com/amplist.php, but it doesn't list a cable for the Mark V, Yet I've read that there is such a cable in the forums. Can anybody show me where to find info on this cable?

Okay, I give up. Where do I find information on the RJM website for the interface cables between the mini amp gizmo and amplifiers?

Your specs seem to indicate that the Mini Amp Gizmo can be powered by the liquid foot Jr's 9v AC 1000mA adapter. What voltage, type (AC or DC), and amount of power (mA) will the Mini Amp Gizmo pass on to the LF Jr through the midi cable?

Okay, so I read up a bit on your mastermind midi controller and the mini amp gizmo for use with my Mesa Boogie Mark V. I understand that I can program each one of the masterminds 125 presets to turn on almost any combination of the eight mini amp gizmo switches which in turn select any grouping...

Can you please confirm if the Ernie Ball VP Junior 25K is compatible with the Mastermind?

Okay, I am new to midi. I am used to the old-school hunt and peck method for for selecting an amp's channel, reverb, EQ, solo, and the effects including wah, delay, chorus, phaser, flanger, tremolo, etc. One of the problems I never quite solved was being able to modify the effects quickly in a...

Can I use the mini amp gizmo [with MBMV compatible cable] with your mastermind [controlling the Eventide Timefactor] to control all switching for the Mesa Boogie Mark V including 3 amp channels, solo function, effects loop, and the mute/tuner function?

Is the Mastermind compatible for controlling the Eventide Timefactor?