I am not sure if I understand the system test exactly but,
there are 3 buttons that won't display white, yellow or red.
Those same buttons will display all the other colors.
The PCB 20! If all 10 loops had the option to have split mono loops like the 6x and of course movable loops.
It would be intresting to see how Ron would deal with the parallel section. Maybe the insert loop before the parallel section could be movable/programable?
It would be nice to have...
Is it possible to use a custom cable to directly connect the PBC or H9 5 pin Midi out/through to the Empress Echosystem 1/4"Trs Midi in without the use of a Midibox?
Has anyone had success with this and what cable configuration did you use?
Thanks
I am setting up a Button Page on my PCB/10 to control my Overture. I added a Device+ and a Device- button.
For some reason on the PBC the Device numbers on the Display work correctly up to 9 after that it does not show 10 or up.
The Overture is changing presets and the PBC is calling up the...
Is it possible to use the USB port from my PBC to my Overture USB C port to power it safely for live situations?
I ran out of power outlets on my pedalboard.
Also would it be possible to use the Midi IN port on my PBC to send midi and/or power to the Overture that way?
And if so do you sell a...
Send and Update on Preset Change makes the IA Cycle Button send it's action every time you change presets.
The first step is set to "None" so when i change presets no CC action for Mix Volume is performed by that button.
Therefore whatever mix volume is programed on the actual H9's preset will...
I use IA Cycle Steps for the same application.
First set up an IA Button and check Send on Pre set change, Update on PresetChange and IA cycle. The first System/step action type is: none. Device is :H9
Now every time you change presets the mix cc does not effect the new preset.
Next Add a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.