Thank you SO much for your help, your availability and your understanding! Thanks to you, my LT is ready and I can finally start to play music with an incredible interface I configured myself. I learnt a lot about the device through the process:-) Have a great day!
I added to my file a global settings indicating that the volume is controlled by the ExpPedal. I turned off "Send on on Preset Change" on all the buttons of page 5 (IA cycle for the Exp Pedal).
Now the Exp pedal controls volume on all pages! Great! But when I go on page 5, use one of the IA...
Aaargh! One step forward, 2 backwards! Now my settings are the following: I stay on preset one and only change pages to access different functions (Now button state stays the same when I switch between pages). I ticked the ExpPedal override option for Preset 1 in the Preset list, put exactly the...
Hi again!
Pfiou! I finally managed to do what you suggested, thanks for your patience and advices! Now I only use the pages, one page per device functions I want to control. Thanks to your advice, button state stays the same even if I switch pages. I do not use presets any more (changed from...
Hi!
All the presets that I programmed are on local pages. Do you mean it would be better to redo everything and organize per pages instead of per presets?
EDIT: I tried to go on the buttons tab, copy my presets to the each page (preset 1 to page 1, preset 2 to page 2), changed the preset + and...
Hi again!
I am currently trying to configure the LT to control a looper and a Digitakt for a live performance. I am doing quite well on my road to achieve that (mostly thanks to your answers and the forum, you are doing a great job) and I made a first test this morning.
I have an issue I do...
Hi!
I try to use one button on the LT to switch between 2 different expression pedal settings blocks. I would to use the IA cycle option.
I set up 3 settings blocks in the global menu for the expression pedal:
block 0 (Pedal OFF) with NONE device and NONE CC number
block 1 (Overdrive) with...
Hi!
My Mastermind LT is controlling another device. This device has 8 tracks and each track receives messages through a channel, i.e Track 1 receives messages through channel 1, Track 2 through channel 2, etc...
The mastermind is set up as follow: on device list, the device 1 is called track 1...
Hi,
I think that pictures will help.
This is my config in Ableton:
This is the midi assignment (blue color): A is drive (A filter and a drive are combined): switch ON/OFF receives the CC toggle #13.
B is the fuzz: switch ON/OFF receives the CC toggle #14.
Global settings in the software...
Hi again,
I saw that putting buttons in the same group allows only one button of this group to be on at any time.
I erased button 1 (clean).
I put button 2 and 3 in the group 1 and switched on the "allow all button off" for this group in the globals menu.
As 2 and 3 are in the same group, only...
Hi!
Just tried this option. When I turn on "allow all button off" in the group, the behaviour of the device is like it was before the first change.
I press button 1: drive is on and Fuzz is off.
When I press it again: Fuzz is on and drive is off. it does not return to the clean sound.
Here...
YYeah!!! One more step towards the elimination of tap-dancing:-) Thanks for having taken the time to answer!
Now I can switch from A to B alternatively, it works.
Let's say that A is drive, turned on when I press button 1. B is Fuzz, turned on when I press button 2 (and A is turned off when I...
Hi everyone,
First, sorry for my English:-)
I basically would like to use Ableton as a multieffects unit when I play guitar on stage and control the DAW via the Mastermind LT.
Let's say that I have 2 effect devices, A and B.
A is turned on or off by pressing a button programmed as follow...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.