Can I set hold function of foot switch to toggle between two midi presets?

[billyofcourse]

I just picked up a free the tone tri avatar chorus. I've currently got a footswitch set to engage the loop that it's in but I was wondering if I could also set up that footswitch to toggle between two of the presets via midi using the secondary hold function of the footswitch? If so, how would I go about setting that button up? Thanks in advance!

 

[rjmmusic]

No problem.

Set button mode to Hold
Select Hold Function at the top of the screen
Set button type to IA
Turn all checkboxes off except IA Link which should be on (we may have to adjust this later depending on how you're using your pedal)
Click Add Action
Set type to PC, device to Tri Avatar, the off value and on value should be set to the two preset numbers that you want the button to toggle between.
If desired, set the On Color and Both Color settings to change the button color based on the selected preset.