Does the footswitch output on the GT 16 support LED type footswitches?

[davemb60]

Hi,
I am looking to add foot switches to my Mastermind GT 16. I was looking at Laney FS2 Mini which uses 9V supply.
I think this will work fine and the LEDs will work if the FS2 Mini is pluged into the TRS and 9V ports on the GT 16.
I was wondering if the mastermind GT 16 TRS footswitch output sources a voltage for LED footswitches that get their source power from the TRS port.
Thanks

 

[rjmmusic]

The external switch inputs can light up LEDs, if the switches are wired correctly. A standard amp footswitch will not work. The details can be found here:

How do I wire an external switch for a Mastermind GT/LT/PBC?

The Mastermind GT, LT and PBC can use external switches to act as additional buttons. These buttons are fully programmable and can do anything that the built-in buttons can do, with the exception that external switches can have only a single colo...

rjmmusic.freshdesk.com

The best place to find switches is on Reverb.com, if you search for RJM footswitch or PBC footswitch, there are a few companies that make them.

 

[Sleestak]

I can confirm that the GT16 does support LED footswitches. The schematic for the footswitches is in the owner's manual, and there are several companies that offer them on Reverb / eBay.