Hey there,
I just bought an Analog Drive form Elektron. I want to make a button page to not only switch through presets but also adjust parameters on the unit like level, drive, bass etc.
I know I have to use actions that send CC messages to my elektron. The Elektron manual states the following:
MIDI CC: 8 bits. 7 in MSB, 1 in LSB.
Parameter CC MSB CC LSB Values
Gain 16 48
Low 17 49
... ... ...
Circuit Select 3 0—15 = Clean Boost
16—31 = Mid Drive
...
I can get the unit to switch the circuits as I understand the way to set up the CC action. But with the Gain, Low, etc I don't know how to set it up properly. I tried many Values but I only got a drop in Gain once.
(The way I got the single time Gain drop to 0 (!) was: IA Button with CC Toggle set to
Analog Drive / CC Toogle #14 off:0 on:99
Analog Drive / CC Toogle #48 off:0 on:99
Interestingly, if I flip the on/off values around I still get a single time Gain drop to 0.
Does anybody have the Analog Drive? Does somebody know how to work with MSB/LSB properly?
Many Thanks in Advance!
I just bought an Analog Drive form Elektron. I want to make a button page to not only switch through presets but also adjust parameters on the unit like level, drive, bass etc.
I know I have to use actions that send CC messages to my elektron. The Elektron manual states the following:
MIDI CC: 8 bits. 7 in MSB, 1 in LSB.
Parameter CC MSB CC LSB Values
Gain 16 48
Low 17 49
... ... ...
Circuit Select 3 0—15 = Clean Boost
16—31 = Mid Drive
...
I can get the unit to switch the circuits as I understand the way to set up the CC action. But with the Gain, Low, etc I don't know how to set it up properly. I tried many Values but I only got a drop in Gain once.
(The way I got the single time Gain drop to 0 (!) was: IA Button with CC Toggle set to
Analog Drive / CC Toogle #14 off:0 on:99
Analog Drive / CC Toogle #48 off:0 on:99
Interestingly, if I flip the on/off values around I still get a single time Gain drop to 0.
Does anybody have the Analog Drive? Does somebody know how to work with MSB/LSB properly?
Many Thanks in Advance!