Hi All,
I've got a trouble with the switching function.
First, the Gurus 1959 use momentary switching. Four functions: Bypass, Ch1, Ch2, Solo.
Fn3 (CH1) et Fn4 (CH2) are on the momentary position.
I've done the good cable between Gurus and PBC, it's OK when I switch CH1 and CH2 with two single buttons.
But I wish to program the PBC to switch CH1 and CH2 with only one button.
I tried with IA cycle:
Step 1: CH1 with yellow LED
Step 2: CH2 with red LED
In IA Actions section, I wrote this:
Type: IA
Name: Gurus Floor
Group: None
Send on preset: Yes
Update on preset: Yes
Cycle
Button Actions:
1: Audio / FnSwitch #3 off:OFF, on:ON
2: Audio / FnSwitch #4 off:OFF, on:OFF
3: System / Step
4: Audio / FnSwitch #4 off:OFF, on:ON
5: Audio / FnSwitch #3 off:OFF, on:OFF
The issue is that's locked on CH1 (with switch noise) when cycle.
On the screen of the PBC, there is the good function indication on 3 and 4 FN Switch.
Thank for your help.
I've got a trouble with the switching function.
First, the Gurus 1959 use momentary switching. Four functions: Bypass, Ch1, Ch2, Solo.
Fn3 (CH1) et Fn4 (CH2) are on the momentary position.
I've done the good cable between Gurus and PBC, it's OK when I switch CH1 and CH2 with two single buttons.
But I wish to program the PBC to switch CH1 and CH2 with only one button.
I tried with IA cycle:
Step 1: CH1 with yellow LED
Step 2: CH2 with red LED
In IA Actions section, I wrote this:
Type: IA
Name: Gurus Floor
Group: None
Send on preset: Yes
Update on preset: Yes
Cycle
Button Actions:
1: Audio / FnSwitch #3 off:OFF, on:ON
2: Audio / FnSwitch #4 off:OFF, on:OFF
3: System / Step
4: Audio / FnSwitch #4 off:OFF, on:ON
5: Audio / FnSwitch #3 off:OFF, on:OFF
The issue is that's locked on CH1 (with switch noise) when cycle.
On the screen of the PBC, there is the good function indication on 3 and 4 FN Switch.
Thank for your help.