HELP!
I just tried upgrading to 3.0 from 2.1.1 and some of my presets (the ones I need) would only show "yyyyyyyyyy". I'm trying to go back to 2.1.1 because I found a great glitch that by using the page menu button I could access any page no matter what my page limit was set to.
HOWEVER, upon downgrading the firmware, it loads nothing but shows "Hold both for setup" as shown in the picture. all the buttons are blank as if it were turned off.
I did try 2.3.6 and it does load like normal, but the glitch I liked isn't there and I'd still like to get back to 2.1.1
![20150906_174108[1].jpg](https://www.rjmmusic.com/forum/data/attachments/0/199-d416eb49ca900d019ce27c7a5350393f.jpg "20150906_174108[1].jpg")
I just tried upgrading to 3.0 from 2.1.1 and some of my presets (the ones I need) would only show "yyyyyyyyyy". I'm trying to go back to 2.1.1 because I found a great glitch that by using the page menu button I could access any page no matter what my page limit was set to.
HOWEVER, upon downgrading the firmware, it loads nothing but shows "Hold both for setup" as shown in the picture. all the buttons are blank as if it were turned off.
I did try 2.3.6 and it does load like normal, but the glitch I liked isn't there and I'd still like to get back to 2.1.1