JamesCardoza
Member
Hey everyone,
I’ve recently noticed a slight buzzing/clicking sound in my rig. The sound is only heard when my volume pedal is up all the way, but is present when no pedals are on in the loop. I checked all my cables, and terminations were fine, and then noticed that the buzz/clicking goes away when I disconnect any of my Midi cables, but specially when I disconnect a midi cable from my in/out American loopers PatchBay on my board. The PatchBay has five neutrik TRS 1/4” jacks and one 5pin din, as well as a stereo/mono sum switch. Could the PatchBay be causing a ground loop in my rig, and If so how can I get rid of it? I’ve attached a picture of my rig for reference, and the Dropbox link below links to an MP3 of the sound, and shows the buzzing going away when I disconnect the midi cable from the PatchBay. https://www.dropbox.com/s/od49svi5ngct6rf/grounding isse .mp3?dl=0
Thanks!
Jimmy
I’ve recently noticed a slight buzzing/clicking sound in my rig. The sound is only heard when my volume pedal is up all the way, but is present when no pedals are on in the loop. I checked all my cables, and terminations were fine, and then noticed that the buzz/clicking goes away when I disconnect any of my Midi cables, but specially when I disconnect a midi cable from my in/out American loopers PatchBay on my board. The PatchBay has five neutrik TRS 1/4” jacks and one 5pin din, as well as a stereo/mono sum switch. Could the PatchBay be causing a ground loop in my rig, and If so how can I get rid of it? I’ve attached a picture of my rig for reference, and the Dropbox link below links to an MP3 of the sound, and shows the buzzing going away when I disconnect the midi cable from the PatchBay. https://www.dropbox.com/s/od49svi5ngct6rf/grounding isse .mp3?dl=0
Thanks!
Jimmy