When switching to another Axe-Fx preset, the GT/MM sometimes lits an effects IA, even though that effect is not present in the preset.
Example:
Preset 1 has a Drive block and its IA button is lit.
Preset 2 doesn't have a Drive block.
When switching from 1 to 2, the Drive IA sometimes stays lit.
Also happens with X/Y states of the AMP block.
Example:
In preset 1 AMP 2 is set to Y.
On the GT an IA is set to AMP 2 X/Y.
When switching to preset 1, the IA sometimes doesn't show that the state is Y.
These errors are not constant.
Any clue why this is happening?
Example:
Preset 1 has a Drive block and its IA button is lit.
Preset 2 doesn't have a Drive block.
When switching from 1 to 2, the Drive IA sometimes stays lit.
Also happens with X/Y states of the AMP block.
Example:
In preset 1 AMP 2 is set to Y.
On the GT an IA is set to AMP 2 X/Y.
When switching to preset 1, the IA sometimes doesn't show that the state is Y.
These errors are not constant.
Any clue why this is happening?