Issue with LED's on Loops 5 and 6

[Steve1973]

Sorry, this is probably something simple but I am a relatively new user and can't seem to figure it out.

I have the Bank up and Down buttons set stock on Loops 5 and 6 on my PBC6X. They bank properly and when I switch to the Loops page, the buttons activate the audio for loops 5 and 6 properly but the LED's aren't coming on for each loop. I can't see anything different on the Buttons tab in the Editor with 5 and 6 from any of other loops and how they are set up. The LED's on Loops 1-4 are working ok. Any ideas? Thanks!

 

[rjmmusic]

Have a look at your settings for page 2 - make sure those buttons have an On Color set (that's not black).

Do they light up on page 3 (the switches page?)

 

[Steve1973]

Thanks for the reply. Yeah, they are set for Blue/On like the other loops on page 2. I checked the Switches page and they are not lit up either for Input or Output. Do you think it is an issue with the LED itself for Loops 5 and 6? I attached my config file if that helps at all.