Issue with two CC commands from a button

A

Alexander

Well-Known Member
GT22 connected to an Axe-Fx III.

I have programmed four buttons to simultaneously switch the AMP 1 and AMP 2 blocks to the same channel.
To do this, I have assigned two CC commands to each button.

So:

button 1 = switch both blocks to channel A
button 2 = switch both blocks to channel B
button 1 = switch both blocks to channel C
button 1 = switch both blocks to channel D

But: it doesn't work.... Whatever configuration I choose, only one block switches.
Is it not possible for a button to fire two CC toggle commands?

@rjmmusic
 
That seems very odd. I’ll be back at my GT22 shortly and I’ll also give that a quick try.

Lee
 
Just gave it a try and its working as expected, both Amp1 and Amp2 change to A on 1st button, B on 2nd button, C on 3rd button and D on 4th button press. I just added a fifth page to my normal setup, so perhaps you'd want to test with this? You can at least validate we're doing the same thing. (Page 5 is the test for the two Amps channel controls)
Lee
 

Attachments

  • LL-5pg-test-YEKb-05142024.rjs
    1.7 MB · Views: 1
This sure sounds like a conflict to me - make sure that the Off values on the buttons are not sending something that would conflict with the On values. Or, assuming that the buttons are grouped, make sure the group has Send Off Messages turned off.
 
Yeah, it happens occasionally that the GT gets 'confused'.
Mostly after writing changes in the editor to the hardware, it seems.

I made a habit to reboot the GT each time, but I sometimes forget.

Config. enclosed.
 

Attachments

  • 15-5.rjs
    1.7 MB · Views: 0
Very true. I’ve also noticed the same, and do my best to self help (reboot) before messaging the forum. Alas, we are only human, and I recently had an issue that caught me sleep deprived and too much time between hiccups, leading to the perfect storm. lol. Cheers, Lee
 
You must log in or register to reply here.
Back
Top