Set it up as "Generic" (that's a selection in the Manufacturer list). Set that device to channel 3. That should be all you need to do on the GT.
From a brief look at the Lehle manual, setup would work like this:
- Select a preset on the GT.
- Using the buttons next to the LEDs on the Lehle, set the A, B and T states for that preset. This is done by holding each button until its light flashes.
- Repeat for each preset.
That should get you started with a basic setup.
Wow!That worked.I just plugged it into my diezel thru.Midi madness.Thanks for the awesome support.Do you mean the Remote In port on the GT? Their cable won't work with that port. Try connecting it to MIDI Out port of the GT (remember to change the MIDI Port setting back to MIDI Out). See if you can get it to respond. If it does work, then either move the connection to the MIDI Thru of one of your other MIDI devices, or get a special cable made that will work with the Remote In port (I can provide instructions).