Mastermind Help!

Phisherman

Active Member
Have a button page dedicated to calling up presets from an HX One (all 10 buttons for 10 presets). I’m having an issue with buttons 7-10.

When I open that “button page” up the light is already on loop 7 even though nothing is turned on. When I press on that button (7) it activates the specific preset it’s designed for (light stays on). However when I press it again it doesn’t turn off. I have to press on buttons 8, 9, or 10 to change presets, then hit 7 again to turn it off. Which comes back to the clean signal.all the top buttons 7-10 operate this way, with loop 7 being the on off portion. The other buttons recall the presets properly but I can’t turn on and off without shuffling the buttons.

I just want each preset to turn on and off with the press of the designated footswitch.

I hope I explained that properly. If not please inquire and I’ll try to better explain. I have video but I can’t seem to upload it here
 
When talking about presets, there isn't ever an "off". You're always on one preset, the only thing you can do is select another preset. What would you want the HX One to do when turning the preset button off?
 
When talking about presets, there isn't ever an "off". You're always on one preset, the only thing you can do is select another preset. What would you want the HX One to do when turning the preset button off?
So I’m not referencing the RJM “presets” as in page 1, or the ones you edit in the Editor. I have a seperate page (button page 5) that I use and its sole purpose is to bring HXOne presets in and out of the signal.

My 1-6 buttons on this page work as designed - I press button and HxOne Preset #4 comes into signal. Press again and it turns the HXOne preset off. but buttons 7-10 operate as mentioned
 
Last edited:
Welp, solved that one on my own. I didn’t have the “allow all buttons off” for group 2 clicked.

Problem solved. This things ridiculous.
 
Back
Top