Hi,
I recently got my mini effect gizmo and I want to use it with the MFC-101. The mini effect gizmo is inside my rack and plugged with several pedals.
I set the mfc-101 to none axe fx mode. I use bank size 5 and the rest of the switches as IA switches, which I turn on/off the pedals in the looper when I need.
Then I go to the MIDI page. I set the CC number as 80 for loop 1 ( It says 88 for loop 1 in the mini effect gizmo in the manual, but I find in the forum that people say it starts at 80), and 000 for off and 127 for on.
The effect gizmo does not turn on the light when I step the switch, even more, there is no sound comes out of the speaker when I turn the loop on by hand.( There is sound when lights all off)
I ve tried to solve this for a long time. But I still figure out nothing... :|
helpppppp......please..... :geek:
Thank you.
I recently got my mini effect gizmo and I want to use it with the MFC-101. The mini effect gizmo is inside my rack and plugged with several pedals.
I set the mfc-101 to none axe fx mode. I use bank size 5 and the rest of the switches as IA switches, which I turn on/off the pedals in the looper when I need.
Then I go to the MIDI page. I set the CC number as 80 for loop 1 ( It says 88 for loop 1 in the mini effect gizmo in the manual, but I find in the forum that people say it starts at 80), and 000 for off and 127 for on.
The effect gizmo does not turn on the light when I step the switch, even more, there is no sound comes out of the speaker when I turn the loop on by hand.( There is sound when lights all off)
I ve tried to solve this for a long time. But I still figure out nothing... :|
helpppppp......please..... :geek:
Thank you.