Micro line mixer with modeler pedals

[dognmoon]

I’m wiring up a board with the PBC6x and a micro line mixer and am trying to figure out where in the chain I would put an iridium, acs1, hx stomp, tonex, etc. or similar amp modeler pedal so that it was between loops 3 and 4 but feeding the dry input of the micro line mixer. Many of these modelers just have input/output with no fx loop, and if they are gained up or driving, I’d prefer them before the wet effects.

My main out (I’m guessing) would be the micro line mixer mix out to a walrus audio canvas stereo line isolator/DI junction box.

 

[rjmmusic]

You would need to put that pedal in a loop, and place the loop right before the parallel loops in the loop order.