vatore3rd
Active Member
I am running Mastermind PBC/10 v5.0.0. I am trying to debug a problem with MIDI with one of my pedals by using MIDI Monitor on my Mac to track what PBC is sending. I have set the MIDI device in question to use USB (rather than MIDI out). I am seeing all MIDI commands targeted to this device from the PBC through Mac MIDI Monitor EXCEPT for MIDI Clock. I have verified that Mac MIDI Monitor is set up to log Clock signals. MIDI Clock is set to Transmit on the PBC, and I know MIDI Clock is coming out of MIDI Out port since all devices are responding to it.
Is there something special that needs to be done to have MIDI Clock transmit out of USB?
I also tried enabling MIDI Clock Start/Stop messages, but I still do not see anything in MIDI Monitor related to Clock.
NOTE: I had the same issue with v4.9.1.
Is there something special that needs to be done to have MIDI Clock transmit out of USB?
I also tried enabling MIDI Clock Start/Stop messages, but I still do not see anything in MIDI Monitor related to Clock.
NOTE: I had the same issue with v4.9.1.