Hey there !
Just wanted to share with you my new DIY pedalboard build, controlled by the mighty PBC/6X !
My previous board was using a BOSS ES-8, and I wanted to shrink it down a bit. It's now lighter, smaller and with... more pedals !
Here is the audio path :
Guitar
> input hub : Shure GLXD HF or cable (switching jack at the input)
> Loop 1 : Xotic SP comp
> Loop 2 : Chase Bliss Preamp MKII
> Loop 3 : Riot clone
> Insert 1 : FX insert point + Hotone volume/wah/exp
> Insert 2 : Jackson Audio Golden Boy
> Loop 4 : Hx Stomp pre-FX Loop (mono)
> Loop 5 : Hx Stomp post-FX Loop (stereo)
> Loop 6 : Empress Echosystem (stereo)
> Loop 7 : Klon clone
> Source Audio Ventris (stereo)
> Stereo out hub
Everything that can is MIDI connected...
Cabling this thing was not easy and space very tight, but I finally got over it !
The pedal board itself is made of plywood coated with "warnex".
Input, output, FX insert and power switch are all accessible from the exterior, enabling to put the lid on without unplugging jacks and IEC cable.
Let me know your thoughts about it !
Just wanted to share with you my new DIY pedalboard build, controlled by the mighty PBC/6X !
My previous board was using a BOSS ES-8, and I wanted to shrink it down a bit. It's now lighter, smaller and with... more pedals !
Here is the audio path :
Guitar
> input hub : Shure GLXD HF or cable (switching jack at the input)
> Loop 1 : Xotic SP comp
> Loop 2 : Chase Bliss Preamp MKII
> Loop 3 : Riot clone
> Insert 1 : FX insert point + Hotone volume/wah/exp
> Insert 2 : Jackson Audio Golden Boy
> Loop 4 : Hx Stomp pre-FX Loop (mono)
> Loop 5 : Hx Stomp post-FX Loop (stereo)
> Loop 6 : Empress Echosystem (stereo)
> Loop 7 : Klon clone
> Source Audio Ventris (stereo)
> Stereo out hub
Everything that can is MIDI connected...
Cabling this thing was not easy and space very tight, but I finally got over it !
The pedal board itself is made of plywood coated with "warnex".
Input, output, FX insert and power switch are all accessible from the exterior, enabling to put the lid on without unplugging jacks and IEC cable.
Let me know your thoughts about it !
